Production identity
Category: classic cocktail · Style: Spirit-Forward · Yield: 1 service · Portion: 1 drink
Glass / vessel: House-appropriate glassware · Ice: As specified by service method · Garnish: As required by house spec
Formula — 1× target batch
Scaling table
Scaling is arithmetic, not permission to ignore service behavior. Verify the 1× formula first, then make a controlled intermediate batch before a 50× event batch.
Method
- Add the liquid ingredients to a mixing glass with ice.
- Stir until cold and properly diluted.
- Strain into a martini glass, garnish, and serve.
Working numbers
Measured pre-dilution liquid represented in ounce-based ingredients: 3 oz where applicable. Dilution control: Training target: establish approximately 20–25% added-water dilution by starting liquid volume, then calibrate to house ice, starting temperature and glass temperature by weighing or volume-checking a controlled sample.
Storage: Single-service formula. Prepare to order unless the Academy batch version explicitly authorizes advance production. Shelf-life rule: Not a holding specification. Perishable ingredients follow the venue’s approved date/time and food-safety procedure; discard any component that is out of standard.
Labeling: For single service, use the current controlled house recipe. For any batch, label identity, version, production date/time, responsible person and the approved discard/review point.
Critical controls
- Measure each ingredient with the specified tool; do not free-pour during calibration.
- Control ingredient and vessel temperature before changing dilution.
- Taste the finished drink at service condition, not the warm undiluted mix.
- Use only the written substitution path; product changes can alter sugar, ABV, bitterness and final balance.
Production verification
Make the formula exactly as written before adjusting it. Record actual packaged or finished yield, starting ingredient temperature where it materially affects the result, and the service portion. Compare the finished sample against the sensory target: Dry, botanical, crisp. If the formula includes London dry gin, Dry vermouth, Orange bitters optional, verify that each product is the intended house specification; a substitution can change sugar, acidity, bitterness, aroma, alcohol strength or texture.
Sensory standard
The target is Dry, botanical, crisp. Evaluate the beverage at its intended serving temperature and dilution. The standard should be descriptive enough that two trained bartenders can compare results and identify which axis—sweetness, acidity, bitterness, alcohol, aroma, body, carbonation, temperature or dilution—is outside the house target.
Supporting professional reading
From the Keep ’Em Coming Back books
Behind the Bar
This page is a practical extension of Volume 4. The book explains the reasoning; this resource helps put it to work.
Gin · Spirit-Forward
Dry Martini is a dry, botanical, crisp spirit-forward recipe. Use this page as a working specification, then test the exact brands, ice, glass, price, and service conditions before adopting it as a house drink.
Single-serve spec
• 2.5 oz (75 ml) London dry gin
• 0.5 oz (15 ml) Dry vermouth
• 1 dash Orange bitters optional
Method
• Add the liquid ingredients to a mixing glass with ice.
• Stir until cold and properly diluted.
• Strain into a martini glass, garnish, and serve.
Shared testing and documentation controls: Bar recipe operating standard →
Recipe-specific working guide
How Dry Martini works in a real bar
Dry Martini is a dry, botanical, crisp spirit-forward built around gin. This rewrite treats the listed specification as a working service standard: every measure, preparation choice, product, temperature, and finishing step must be tested together before the venue adopts it.
Ingredient functions
• 2.5 oz London dry gin is the structural lead. The house test should record both brand and proof; a substitute with a different flavor concentration can make the same written specification taste hotter, softer, sweeter, or more aromatic.
• 0.5 oz Dry vermouth is the flavor bridge between the base and the balancing ingredients. Measure carefully: small overpours can dominate the recipe or leave the finish sticky.
• 1 dash Orange bitters optional carries aroma and visual identity. Keep the preparation consistent and discard tired product instead of letting a garnish or herb introduce off flavors.
Technique and failure points
Dry Martini depends on controlled stirring to chill and dilute while retaining a dense, clear texture. Combine the measured ingredients over firm ice, stir with an even path, and strain into martini glass, garnish, and serve as soon as the house dilution point is reached.
The critical control is stopping at the same point every time. Too little stirring leaves the drink hot and sharp; too much makes the finish thin. Glass temperature, ice quality, and batch temperature all change the number of turns required.
• Inconsistent ice quality changes temperature and dilution even when every liquid measure is correct.
• Changing the glass, fill line, or garnish without retesting alters yield and guest perception.
Service-speed and batching plan
With 3 measured ingredients and a moderate service classification, Dry Martini should be treated as a defined station procedure rather than a memory test.
Failure laboratory
Version control
Do not silently change the working formula. Record the recipe version, date, reason for change, test result and person approving the update. If a brand or product specification changes, rerun the sensory and cost check before treating the substitution as equivalent. A formula is professional only when the team can reproduce the same intended result and explain why a revision was made.